Rewoda hub docking station 11 in 1

Rewoda hub docking station 11 in 1


This hub docking station support hot-swappable, plug and play, easy to use and free driver supports for Windows XP/Vista/7/8 & Mac OS,linux. And it supports Full-speed(5GMbps) USB device profiles. It is suitable for the Mac with TYPE C interface and mouse, card reader,etc. And hub docking station can solve the problem of Macbook port connection restrictions. In addition, this hub docking station also can meet the external expansion of the use to provide a strong power for notebook computer. It can connect more devices at the same time. Moreover,display or projector can be connected to the hub by VGA or HDMI port. 


Interface type:  RJ45+HDMI+VGA+TF+SD+USB 3.0 * 3+Audio jack+USB2.0+PD
USB3.0 *3, Type c, SD and TF port 
HDMI : 3840*2160*30HZ 
VGA: 1080P (Is Working for HDMI 1080)
RJ45: 10M/100M/1000M
SD card: Micro SD(TF)
Downward Compliant with USB version Port: 3.0
Type c port:     PD2.0

More Port, More Convenience




SD/TF Card Slot


2 x USB-A 5Gpbs




Gigabit Ethernet


  • Rewoda neutral retail package
  • Export Carton

Services & Support


Would your phone will be damaged if you don’t unplug the charger when it’s full?

The power management of modern mobile phones is perfect. After the mobile phone is full, the charger is in light load operation, and the output current is very small. Because the battery is basically full, the current that can flow is very small. At this time, the chip automatically stops charging and the battery changes to the discharge mode. Also use an external charger to work together. In theory, there is no harm to the phone because there are many protection mechanisms in control of this process. However, considering that after connecting the charger, the system becomes complicated, and the probability of the problem will indeed become high, so it is full of pulling or not, it is up to you to decide. Considering safety, unattended situations, it is better to unplug it.

Could the mobile phone charger be used directly in Taiwan?

Depending on the voltage on the charger, the voltage is usually printed on the surface of the charger:

If you print 100~220V on it, you can use it in Taiwan.

If you only print 220V, then you need to bring a conversion socket.

What is the frequency of the mobile phone charger?

The frequency varies according to the voltage of different countries.

China’s single-phase electrical frequency is 50Hz. According to preliminary statistics, global single-phase electricity has basically only two frequencies of 50 Hz and 60 Hz, and the voltages are different, ranging from 100, 110, 120, 127, 220, 230, and 240.

What about after-sales service?

We offer a 12-month warranty.